Crack Repair | Patch Repair
Repair cracks and patch spalled and damaged concrete
Crack Repair
The Armor-Crete® Crack Repair system has proven to be very successful for repairing structural moving cracks prior to applying one of several Armor-Crete® resurfacing products. There are basically two types of cracks; structural cracks and non-moving surface cracks. Structural cracks go all the way through the substrate and begin or end at an edge or joint. They can be less than 1/16th of an inch to more than one inch in width. Structural cracks should always be repaired with the Armor-Crete® Crack Repair System. Non-moving surface cracks start and stop in the middle of a slab and do not go all the way through the concrete substrate. Non-moving cracks may not need to be repaired and can simply be covered up during the Armor-Crete® resurfacing application.
Patch Repair
Armor-Crete® Patch Repair material is used to repair holes and spalls. It can also be used for various other applications as listed below:
leveling coat to fill in low areas or to make a rough surface smooth
re-pitching coat to correct the slope for proper drainage
as an underlayment for carpet, tile or other types of flooring
to patch stucco and masonry
to eliminate tripping hazards at joints where one side of a concrete slab is raised
Armor-Crete® Patch Repair material can be applied from zero to 3" thick and sets in 20 minutes..
